LCD Breadboard Adapter with Backlight Driver
This is a breadboard adapter I designed for the CFAF320240F TFT display from Crystalfontz. It breaks out the 0.5mm pitch connector to 0.1″ for use on a breadboard, and has a Fairchild FAN5333 LED driver circuit to power the backlight. All of the components were hand-soldered including the connector (using the flood-and-suck technique). It was designed for my PIC32 3D engine project, shown being used below:
This setup also uses the joystick (seen in the lower left) to rotate the 3D object on the screen around.